For ARTIZANS 90 TO 200

The KCR32C is multi-program controller designed for glass, ceramics & pottery use.

It is targeted towards glass use with 32 programs each of up to 32 segments. Each segment is a controlled heating/cooling ramp followed by a soak. It is supplied pre-programmed with 9 typical glass programs and 9 typical ceramics programs (which can be over-written).

The slow rate capability of the KCR32C, down to 1c per hour, makes it the perfect controller for complicated glass cycles.

 KCR32C Controller features:

• 32 programs - each with up to 32 segments. 
• Each segment is a controlled heating/cooling ramp soak.
• Suitable for glass or ceramics use.
• Soak times up to nearly 100 hours.
• Ramp rates from 1 to 999°C/hour full.
• Program Pause & Segment Advance facilities.
• Can be held remotely, allowing for an easy and comfortable programming process.
• Keyboard lockable.
• Delayed start facility - up to 4 days.
• Power failure recovery.
• Energy used display.
• Event / Damper / Fan relay output.
• Alarm relay with alarm buzzer.
• Mains power switch.
• Built in the United Kingdom.

KCR32C WIFI Controller (optional)

The KCR32C WIFi is internally the same as the KCR32C but has the capability to be accessed and controlled remotely from your mobile device.

This is one of the most important advances in Kilncare kilns for many years. Using Kilncares GATEway access site you can view how your kiln is running in real time. Stop the firing or adjust programs all without even being in the same country let alone the same room.

The KCR32 WIFI is also fitted with a USB port that allows programs to be entered that way direct from PC if required and also allows us to apply updates and run diagnostics without travelling to your kiln.

Internet access to view real time status and access data

The optional KCR32C WIFI allows the user to access the kiln in real time from anywhere with internet access via the Kilncare GATEway on our website.

The benefits of this are obvious as there is no longer the need to travel to the studio or work place to see how the firing is proceeding or if indeed the firing is going as planned. 

Also in the GATEway, which is unique to each user via password access, there is a firings library where past firings can be stored and named, a notes section and a log amongst other features.

For ARTIZAN 265

The KCR32Z WIFI is a multi-zone controller designed for use on our larger kilns where total evenness of chamber temperature is much more difficult to maintain through simple kiln design alone. 

The controller monitors one section of the kiln and adjusts the other sections to maintain perfect chamber uniformity with regards to temperature.

KCR32Z WIFI Controller features

• Multi-zone control.
• 32 programs - each with up to 32 segments.
• Each segment is a controlled heating/cooling ramp soak.
• Suitable for glass or ceramics use.
• Soak times up to nearly 100 hours.
• Ramp rates from 1 to 999°C/hour full.
• Program Pause & Segment Advance facilities.
• Keypad lockable.